Skip to content
3D Prints Fast

3D Printed Kissing Clothes Pegs, Thicker Design

3D Printed Kissing Clothes Pegs, Thicker Design, design preview, turn three quarter

Design preview. Rendered from the file, not a photo.

This model is not currently offered as a verified ready to buy print.

Already have the file?

Upload it and we'll quote your print.

Upload your file

Looking for something like this?

Ask the Solution Counter.

Ask the Solution Counter

What it does

  • Thickened to 8mm so your pegs grip clothes firmly without slipping off the line
  • Notched clip ends hold wet fabric tight, so you hang laundry faster and with less worry
  • Print 24 pegs at once on a 200x200 bed, so you get a full clothesline set from one file
  • Reinforced design stays strong through hundreds of wash cycles and outdoor weather

Your clothes stay put on the line. These kissing pegs hold fabric with a firm grip that does not let go, even when wind picks up or weight pulls down. No more chasing socks across the yard.

The design uses 8mm thickness throughout to keep pegs from bending or cracking over time. Notches carved into the clip end grab your clothes and hold them steady. The design started from the original clothes peg and got stronger through real use and updates.

This file works with most home 3D printers. Once printed, you have outdoor-ready pegs that work year after year.

7.1k downloads in the maker community. That is interest in the design on the site it came from, not our sales.

What you get

  • This design prints as one piece.
  • Nothing else to print or buy for this to work.

What it is made of

Designs like this print well in PLA. Compare the materials.

Printed plastic is strong for its size, but it is not metal. We have not load tested this design, so we do not publish a weight rating. Keep it out of a hot car and away from open flame.

More like this

Who made this design

Designed by MettaUK. We did not draw it.

Shared under Creative Commons, credit required. See the original design