3D Printed Pegboard Hooks 1/8 inch - Custom Storage

Design preview. Rendered from the file, not a photo.

The maker says it fits: pegboard with 1/8 inch (3mm) holes and 1 inch (25mm) hole spacing. See the proof

This model is not currently offered as a verified ready to buy print.

Already have the file?

Upload it and we'll quote your print.

Upload your file

Looking for something like this?

Ask the Solution Counter.

Ask the Solution Counter

What it does

Choose your size: narrow or wide, short or tall, so you hang exactly what you own
Pick your strength level: regular, strong, or paranoid thickness, so your tools stay secure
Fits standard pegboards with 1 inch hole spacing, so setup takes minutes

Your pegboard stays bare until you have the right hooks. These 3D-printed hooks fit 1/8 inch holes and let you build your storage your way. You get to pick narrow or wide, short or tall, and how thick you want them, so your setup matches your stuff.

Each hook works with standard pegboards that have 1 inch spacing between holes. Print one style or mix and match. Hang pliers, tools, cords, or light gear without guessing if they'll hold.

4.1k downloads in the maker community. That is interest in the design on the site it came from, not our sales.

What it fits

The maker says it fits: pegboard with 1/8 inch (3mm) holes and 1 inch (25mm) hole spacing

That is the maker's word, not a fit we measured. Check the size below against your own.

pegboard with 1/8 inch (3mm) holes and 1 inch (25mm) hole spacing (model with 1)From the maker's own listing notes, checked 2026-08-13. See the original post

What you get

This design prints as one piece.
Nothing else to print or buy for this to work.

What it is made of

Designs like this print well in PLA. Compare the materials.

Printed plastic is strong for its size, but it is not metal. We have not load tested this design, so we do not publish a weight rating. Keep it out of a hot car and away from open flame.