Do suction cup camera mounts really work?

Yes, on clean glass and smooth tile, for light cameras. Camera suction mounts are rated near 3 pounds and most small cameras weigh 3 to 5 ounces. Grip fades with hot and cold swings, so press the cup back on now and then.

Which cameras screw onto a standard suction mount?

Wyze Cam v3 and v4 for sure. Wyze confirms every Wyze Cam from v1 through v4 has the standard 1/4-20 tripod thread. Ring publishes nothing official about a thread on the Indoor Cam, and Blink Mini and eufy indoor cams use their own mounts with no thread at all.

Can I mount a Blink Mini on a suction mount?

Not directly. The Blink Mini has no tripod thread. It uses its own two-point mount, so it needs a bracket made for that shape.

Suction or adhesive strips: which holds more?

Camera suction mounts are rated near 3 pounds. Some heavy-duty adhesive strips are rated up to 16 pounds. Both hold a 5 ounce camera with room to spare. Pick by surface: suction for glass, strips for smooth painted walls.

Will a window mount leave marks when I move out?

A suction cup leaves nothing behind. Adhesive strips are made to pull off clean, but follow the maker's removal steps so the paint stays put.

Updated 2026-07-12 · 5 min read

No-drill camera mounts for renters: what actually holds

Quick answer

Renters can mount most small security cameras without drilling. Window suction mounts hold about 3 pounds, and small cameras weigh 3 to 5 ounces, so weight is not the issue. The catch is the connector. Only some cameras have the standard 1/4-20 tripod thread a suction mount screws into. Wyze cams have it. Blink Mini and eufy indoor cams do not.

Your lease says no holes. Your camera still needs a view of the door or the parking spot. The two no-drill paths that work are window suction mounts and adhesive strips, and the specs say plenty about which one fits your camera.

The weight math is easy

A camera-style suction mount is rated near 3 pounds. Small indoor and outdoor cameras weigh 3 to 5 ounces. That is a wide safety margin before you even look at adhesive strips, which run up to about 16 pounds.

Camera	Weight
Ring Indoor Cam (2nd gen)	About 93.5 g (3.3 oz)
Wyze Cam v3	98.8 g (3.5 oz)
eufy Indoor Cam C120	104.3 g (3.68 oz)
Blink Outdoor 4	141 g (5.0 oz)

Weights from maker spec pages and retail listings. Every camera here weighs a third of a pound or less.

The thread is the real question

A suction mount holds your camera with a screw post: the standard 1/4-20 tripod thread. Some cameras have that thread. Some use their own mount shapes instead, and no puck will screw into them without an adapter.

Camera	Standard 1/4-20 thread?	Notes
Wyze Cam v3	Yes	Confirmed by Wyze. The thread hides under a base plate that unscrews.
Wyze Cam v4	Yes	Wyze says every Wyze Cam from v1 to v4 uses the standard 1/4-20 mount.
Ring Indoor Cam (2nd gen)	Reported, not confirmed	Mount sellers report a threaded hole behind a rubber cap. Ring's own specs do not say.
Blink Mini 2	No	Uses its own two-point mount. Needs a bracket made for that shape.
Blink Outdoor 4	Unknown	Ships with its own mount. No source confirms a thread either way.
eufy Indoor Cam C120	No	Uses its own two-peg plate, with tilt and swivel built into its neck.

Thread info from maker support pages where confirmed. We say so where it is not.

The honest limits of suction

Suction grips smooth, clean glass. It does not grip textured walls, brick, or dusty window film. And grip fades slowly as seasons swing hot and cold. Wipe the glass before you mount, and press the cup back on every month or two.

Adhesive strips, the other path

Strips hold far more weight and work on smooth painted walls, tile, and metal. They come off clean when you follow the maker's removal steps. On rough or flaky paint, they can pull chips, so test a hidden spot first.

Putting a doorbell up instead of a camera? Read the brick guide or doorbell facing the wrong way.

Video on the way

A 45 second demo: a suction window mount going up, holding a camera, and coming off clean.

We are filming this one in our own shop.

The printed fix

We print a window mount for cameras that take a standard 1/4-20 thread, in the color you pick. Made in the USA when you order.

See the window mount Print your own file

Common questions

Do suction cup camera mounts really work?: Yes, on clean glass and smooth tile, for light cameras. Camera suction mounts are rated near 3 pounds and most small cameras weigh 3 to 5 ounces. Grip fades with hot and cold swings, so press the cup back on now and then.
Which cameras screw onto a standard suction mount?: Wyze Cam v3 and v4 for sure. Wyze confirms every Wyze Cam from v1 through v4 has the standard 1/4-20 tripod thread. Ring publishes nothing official about a thread on the Indoor Cam, and Blink Mini and eufy indoor cams use their own mounts with no thread at all.
Can I mount a Blink Mini on a suction mount?: Not directly. The Blink Mini has no tripod thread. It uses its own two-point mount, so it needs a bracket made for that shape.
Suction or adhesive strips: which holds more?: Camera suction mounts are rated near 3 pounds. Some heavy-duty adhesive strips are rated up to 16 pounds. Both hold a 5 ounce camera with room to spare. Pick by surface: suction for glass, strips for smooth painted walls.
Will a window mount leave marks when I move out?: A suction cup leaves nothing behind. Adhesive strips are made to pull off clean, but follow the maker's removal steps so the paint stays put.

Ring, Nest, eufy, Blink, Wyze, eero, TP-Link, Netgear, ASUS, and Starlink are trademarks of their owners. We are not connected to those companies. We use the names only to say what things fit.