Sink Sponge Holder, 3D Printed Kitchen Accessory

Design preview. Rendered from the file, not a photo.

The maker says it fits: 47mm–50mm sink dividers (dual-basin kitchen sink). See the proof

This model is not currently offered as a verified ready to buy print.

Already have the file?

Upload it and we'll quote your print.

Upload your file

Looking for something like this?

Ask the Solution Counter.

Ask the Solution Counter

What it does

Clips onto your sink divider so your sponge drains and dries inside the basin, keeping your counter dry and clean.
Tapered shape grips sponges sizes securely in place, so you don't fish around for a soggy sponge.
Made from the US with 3D printing technology, created by designer Dezbot for dual-basin kitchen sinks.
Holds sponges on a 47mm to 50mm divider, so water runs back into the sink instead of pooling on your counter.

Stop leaving wet sponges on your counter. This sink sponge holder keeps your sponge right where it drains, making cleanup faster and your sink area cleaner.

Your holder clips firmly onto the divider between your two sink basins. The tapered design grips most sponge sizes without squeezing them flat. Water drips straight back into the basin instead of puddling on the counter where it breeds germs.

Designed for standard 47mm to 50mm sink dividers, this 3D-printed kitchen tool sits in the basin itself. You get a sanitary, space-saving spot for your sponge that works with your sink's natural flow.

3.9k downloads in the maker community. That is interest in the design on the site it came from, not our sales.

What it fits

The maker says it fits: 47mm–50mm sink dividers (dual-basin kitchen sink)

That is the maker's word, not a fit we measured. Check the size below against your own.

47mm–50mm sink dividers (dual-basin kitchen sink) (model 47mm)From the maker's own listing title, checked 2026-08-13. See the original post

What you get

This design prints as one piece.
Nothing else to print or buy for this to work.

What it is made of

Designs like this print well in PLA. Compare the materials.

Printed plastic is strong for its size, but it is not metal. We have not load tested this design, so we do not publish a weight rating. Keep it out of a hot car and away from open flame.