Compatible with Sony CCD FPV Cam Holder 30 Degree Tilt

Design preview. Rendered from the file, not a photo.

The maker says it fits: Lisam210 QAV 210 30 Degree Uptilt, 33x33mm board cameras (600TVL 1/3 Sony CCD, 27x27mm holes). See the proof

This model is not currently offered as a verified ready to buy print.

Already have the file?

Upload it and we'll quote your print.

Upload your file

Looking for something like this?

Ask the Solution Counter.

Ask the Solution Counter

What it does

Holds big 33x33mm Sony CCD board cameras securely so your FPV footage stays steady and clear.
30 degree uptilt angle lets you aim your camera down, so you capture the view you need while flying.
Fits 27x27mm hole pattern on your QAV 210 frame, so setup takes just minutes without extra adapters.
Works with 600TVL Sony CCD cameras, so your existing gear mounts without upgrades.

You want FPV footage that stays rock solid during fast flights. This camera holder locks your big Sony CCD board camera in place at a 30 degree tilt, so you get the angle you need every time you fly.

Made for 33x33mm board cameras with 27x27mm mounting holes, this holder slides right onto your QAV 210 frame. The fixed 30 degree uptilt means your 600TVL Sony CCD camera points down just enough to see the ground below. Setup is quick; no hunting for spacers or custom brackets.

This is a 3D-printed part made to order from the US. Not affiliated with, endorsed by, or sponsored by Sony. Sony and its product names are trademarks of their respective owners.

534 downloads in the maker community. That is interest in the design on the site it came from, not our sales.

What it fits

The maker says it fits: Lisam210 QAV 210 30 Degree Uptilt, 33x33mm board cameras (600TVL 1/3 Sony CCD, 27x27mm holes)

That is the maker's word, not a fit we measured. Check the size below against your own.

Lisam210 QAV 210 30 Degree Uptilt (model QAV 210)From the maker's own listing title, checked 2026-08-13. See the original post
33x33mm board cameras (600TVL 1/3 Sony CCD, 27x27mm holes) (model 33x33mm)From the maker's own listing notes, checked 2026-08-13. See the original post

Brand names here only say what this part fits. We are not connected to those companies, and they did not make or check this part.

What you get

This design prints as one piece.
Nothing else to print or buy for this to work.

What it is made of

Designs like this print well in PLA. Compare the materials.

Printed plastic is strong for its size, but it is not metal. We have not load tested this design, so we do not publish a weight rating. Keep it out of a hot car and away from open flame.